The installation of a split system air conditioner is a crucial task. If done properly, the AC unit will offer you optimum performance. But, if the split system air conditioner installation is not carried out efficiently, you will not receive the desired cooling effect and there will be frequent breakdowns too. If you want to save money on the repairs and maintenance, you will have to choose only professionals for installing the AC unit. Do not leave the task to a novice but always summon a reliable technician for the installation work. Becoming a professional in installing split system AC needs time and practice. There can be refrigerant or gas leakage in case the installation is not done properly. Various factors need to be taken into consideration when you are installing a split AC.
Initially, you need to determine the exact location of the indoor unit and the outdoor unit and only after that the steps for split system air conditioner installation may be initiated. As the name suggests, the indoor unit is installed inside the room and must be placed just above the bed. This way you will get the maximum cooling effect. But, if you do not want chilled air, just change the direction of louvers. When it comes to the height of the indoor unit, it should be nearly 10 feet above the floor level. This way, the cool air will be circulated used to cool the room and not the hot roof. This indoor unit should also be conveniently accessible so that it becomes possible to change the filters. On the other hand, the outdoor unit can be placed or installed in the open terrace. The air must be allowed to flow freely over the condenser and the compressor.
Installation Tips for The Outdoor Unit of The Ac
The surface where you install outdoor unit should be rigid enough to avoid any vibration. If there is vibration in the outdoor unit, it will lead to excessive noise and may cause breakage of copper tubing, leading to the leakage of refrigerant. It is important to keep the outdoor unit at a height which is more than the height of indoor unit. If the outdoor unit of the AC is below the indoor unit, the compressor power will be used in pulling up the refrigerant against the gravity which will reduce the performance of the compressor. Most outdoor units tend to be silent and so you need not worry about the noise produced from it. As the internal components of the outdoor unit are shielded, the unit stays safe from climatic conditions.
The Tilt Angle of The Indoor Unit
When you fix up aluminum bracket onto the walls, you need to make sure that the bracket is given some tilt angle. This allows the angle of the indoor unit to remain at a proper angle to permit an unrestricted flow of condensed water through the drain pipe. The indoor and outdoor unit needs to be installed away from sunlight to attain optimum cooling effect.
The Placement of Outdoor Unit Should Be Perfect
You should place the outdoor unit on a rigid or flat surface. The outdoor unit constitutes the key components like condenser, compressor and fan motor. If you do not do so, there will be vibration to hinder the performance of AC unit. This can lead to breakage of pipes, the leakage of refrigerant and may cause condenser to damage.
When it comes to cooling, the distance between indoor and outdoor unit matters and has an impact on cooling. For split system air conditioner installation, you must always consider hiring a professional.
The post Tips and Guidelines to Installing a Split System Air Conditioner appeared first on Top Inspirations.
